2014-2016 BMW M235i N55B30A Engine Long Block Assembly. Removed from a 2016 BMW M235i equipped with the dual clutch automatic transmission and only 85k miles. This engine was able to be fully tested and ran prior to removal from the vehicle. The engine idled smoothly with no hesitations or smoking on start up. The engine had no major fluid leaks during testing, however there was some light oil residue from the turbo oil drain pipe and valve cover gasket. We also recommended replacing any easy to access gaskets and seals while the engine is removed from the vehicle, such as rear main seal and valve cover gasket. The included turbocharger is in good usable condition with no major leaks or smoking. Turbo had no excessive side to side play in the turbine wheel assembly. Exterior of the engine block is free of any major corrosion or surface rusting. Wiring harness is fully intact with no missing or damaged connectors. Includes everything in the pictures, nothing more, nothing less: Engine cover, motor mount brackets, fuel rail, direct injectors, high pressure fuel pump, coils, throttle body, intake manifold, Turbocharger, oil filter housing, AC compressor, Alternator, water pump, crank pulley, starter, and wiring harness. Does not include any other accessories or ECU. You will need to reuse your existing components and hardware for installation. Will fit both the rear wheel drive and all wheel drive "xDrive" models. This was removed from a RWD model, so if you plan on installing this engine into a M235i xDrive model, you may need to reuse some of your existing components such as oil pan and oil pickup tube.
2014-2016 BMW M235i N55 3.0l Engine Long Block w/ Turbocharger / N55B30A / 108k / B2004
2016 BMW M235i Coupe - 108k
Engine is in good running condition, fully tested and ran prior to removal from the vehicle. Engine idled smoothly at 800rpm with no hesitations, misfires, or smoking upon startup. Engine was able to be compression tested with good results (225-225-220-215-225-225). The engine did have visible oil leak residue from the oil pan gasket during testing. We suggest replacing any easy to access gaskets and seals prior to installation in the vehicle. The included turbocharger is in good usable condition. The compressor wheel had no visible side to side or in and out shaft play during inspections. Fluids have been drained with no abnormalities. Will ship drained of all fluids.
Engine block has not been hit or cracked in any way. Free of any major surface rusting or corrosion. Includes everything as shown in the photos, nothing more, nothing less. Includes the engine long block, engine cover, throttle body, intake manifold, high pressure fuel pump, fuel rail, injectors, wiring harness, crank pulley, power steering pump, alternator, AC compressor, starter, water pump, exhaust manifold, turbocharger, oil pan, and oil filter housing as shown. You will need to reuse some of your existing hardware and components for installation. This does NOT include the engine control module / ECU that mounts to the underside of the intake manifold.
2014, 2015, 2016 BMW M235i
Will fit both the rear wheel drive and all wheel drive "xDrive" models. This was removed from a RWD model, so if you plan on installing this engine into a M235i xDrive model, you may need to reuse some of your existing components such as oil pan and oil pickup tube.
This engine was removed from a vehicle equipped with the manual transmission. This can be used for DCT automatic transmission models as well, however there may be some wiring and sensors that need to be transferred over from your existing engine for installation.
This item will ship on a pallet via Fedex Freight to the Continental 48 States, Mexico and Canada. Please add the item to the cart to see the exact shipping costs associated with it. There will be two options for shipping, one without a liftgate equipped truck and one with a liftgate. If you have a business address with a loading dock, forklift or other means of unloading the pallet off of the delivery truck you will not need a liftgate equipped truck for delivery. If you have a residential address or are unsure about unloading the pallet from the truck please refer to the weight of the shipment above on this listing page, so you can make the decision on whether you will need a liftgate or not. For residential deliveries Fedex will contact you, at the phone number provided, to schedule an appointment for delivery. As with all freight companies they deliver to the curb, not inside, so please plan accordingly for your delivery.
This engine comes with a 90 day warranty that begins on the day the engine is received by the buyer. The warranty covers the engine block, crankshaft, pistons, rods, bearings, oil pump, cylinder head, head gasket, camshafts, valves and lifters against any defects that prevent the engine from operating as intended from the factory or make noises consistent with damaged engine internals ( rod knock, spun bearings, etc). Every engine we list on eBay has been fully run tested, compression tested and when possible test driven to make sure it runs smoothly, makes no odd noises and does not overheat.
What is not included in the warranty is common wear and tear items such as: timing belt, water pump, thermostat, spark plugs, spark plug wires, sensors and seals. While these items were in working condition at the time of testing, their lifespan is usually shorter than the internals of the engine and are therefore not covered under warranty. If any seals or gaskets are leaking at the time the engine is being tested and removed, or any sensors broken or defective, they will be noted in the item description. No labor, diagnostic or towing costs will be covered under warranty. In the event of a warranty claim, please be prepared to supply pictures, video and/or a statement from a shop/mechanic to validate the claim. This warranty is non-transferrable. It is only applicable to the original purchaser.
Situations that will void the warranty:
Overheating of the engine. We install "heat indicator tabs" on every engine prior to shipping that show when an engine has been operated at a temperature significantly higher than normal operating temperature. If these tabs show signs of overheating, the warranty will be void. If the engine in your car is being replaced due to damage from an overheating condition please locate and fix the source of the issue prior to running your new engine.
Not running fresh oil and oil filter in the engine (these engines ship drained of all fluids).
Installation of an aftermarket turbocharger, supercharger or Nitrous Oxide kit.