Product Description
2008-2013 Chevrolet Corvette C6 Base 6.2l LS3 Engine Long Block. Removed from a 2008 Chevrolet Corvette C6 Coupe Base with 51k miles. Removed from a running and driving car, so this motor was able to be fully driven and tested before removal. Engine idled smoothly at 800rpm with no smoking or hesitations. The internal oil pump is in good working condition with good pressure during operation. It also compression tested with good results (230-230-230-225 / 230-230-230-225). This car had an automatic transmission, but it may also be used for a manual transmission with some minor changes such as the flex plate, sensors, and wiring harness. The engine did have some oil residue from the rear main seal and valve cover gaskets. We suggest replacing these gaskets, as well as any other easy to access seals while the engine is removed from the vehicle. The downpipes studs on the exhaust manifolds are typically rusted, which cause some of them to break during removal. We suggest replacing all of the downpipes studs prior to installation. Includes everything as pictured, nothing less, nothing more. Includes the intake manifold, Engine cover trims, coil packs, plug wires, wiring harness, power steering pump, alternator, injectors, AC compressor, fuel rail, exhaust manifolds, starter, and motor mount brackets. There will be some components and hardware you will need to reuse from your existing vehicle.
Fits:
2008, 2009, 2010, 2011, 2012, 2013 Chevrolet Corvette Base (6.2l)
****Please Read- Shipping Details Below****
This item will ship on a pallet via Fedex Freight to the Continental 48 States, Mexico and Canada. Please add the item to the cart to see the exact shipping costs associated with it. There will be two options for shipping, one without a liftgate equipped truck and one with a liftgate. If you have a business address with a loading dock, forklift or other means of unloading the pallet off of the delivery truck you will not need a liftgate equipped truck for delivery. If you have a residential address or are unsure about unloading the pallet from the truck please refer to the weight of the shipment above on this listing page, so you can make the decision on whether you will need a liftgate or not. For residential deliveries Fedex will contact you, at the phone number provided, to schedule an appointment for delivery. As with all freight companies they deliver to the curb, not inside, so please plan accordingly for your delivery.
**Warranty Information**
This engine comes with a 90 day warranty that begins on the day the engine is received by the buyer. The warranty covers the engine block, crankshaft, pistons, rods, bearings, oil pump, cylinder head, head gasket, camshafts, valves and lifters against any defects that prevent the engine from operating as intended from the factory or make noises consistent with damaged engine internals ( rod knock, spun bearings, etc). Every engine we list has been fully run tested, compression tested and when possible test driven to make sure it runs smoothly, makes no odd noises and does not overheat. In addition, we also make sure there is no excess crank pulley wobble that indicates a worn crankshaft keyway.
What is not included in the warranty is common wear and tear items such as: timing belt, water pump, thermostat, spark plugs, spark plug wires, sensors and seals. While these items were in working condition at the time of testing, their lifespan is usually shorter than the internals of the engine and are therefore not covered under warranty. If any seals or gaskets are leaking at the time the engine is being tested and removed, or any sensors broken or defective, they will be noted in the item description. No labor, diagnostic or towing costs will be covered under warranty. In the event of a warranty claim, please be prepared to supply pictures, video and/or a statement from a shop/mechanic to validate the claim. This warranty is non-transferrable. It is only applicable to the original purchaser.
Situations that will void the warranty:
Overheating of the engine. We install "heat indicator tabs" on every engine prior to shipping that show when an engine has being operated at a temperature significantly higher than normal operating temperature. If these tabs show signs of overheating, the warranty will be void. If the engine in your car is being replaced due to damage from an overheating condition please locate and fix the source of the issue prior to running your new engine.
Not running fresh oil and oil filter in the engine (these engines ship drained of all oil).
Installation of an aftermarket turbocharger, supercharger or Nitrous Oxide kit.
