2001-2005 Mazda Miata Front Driver Control Arm Set & Spindle. Removed from a 2002 Special Edition Miata with sport brakes and ABS. This will still work for cars without ABS, but you must remove the sensor. These were removed from a high mileage vehicle, so the pricing is lower than normal to reflect that. If you have an 2001-2002, please verify that you have the larger sport brakes because this set will not fit smaller brake equipped vehicles. The spindle is fully tested and in good working condition, with a good bearing. There is some surface rust and paint peel. There is some heavy scratching and a hole in the dust shield, as shown in the photos. There is scraping and scratching from typical use and from being fork lifted. Includes hardware as shown, you may need to reuse some of your existing hardware for installation.