2005-2008 Mercedes Benz SLK55 AMG R171 Passenger Front Spindle Hub w/ Control Arms. Removed from a 2006 Mercedes Benz SLK55 AMG with 78k miles. Includes the passenger side front spindle / hub assembly, knuckle, upper control arm, and lower control arm, as shown in the photos. In good physical condition with no major bends or damage. All mounting tabs and bushings are fully intact. The rubber bushings have no rips or tears, however there is some light cracking and wear due to normal use and age. The wheel bearing spins smoothly with no grinding or excessive play. There is some typical surface rusting and corrosion on the hub flange and brake dust shield as shown. This Brake Dust shield is specific to the SLK55 AMG models without the performance package (340mm front brake rotors). The lower edge of the shield was slightly bent as shown. This does not affect the functionality of the shield or conflict with installation of the brake caliper or rotor. The control arms and knuckle will still fit SLK280, SLK300, and SLK350 model, however you will need to reuse your existing brake dust shield. Includes everything as shown in the photos, you may need to reuse some of your existing hardware for installation.