2013-2016 Hyundai Genesis Coupe Driver Front Knee Spindle w/ Hub & Control Arms / 98K HG030

2013-2016 Hyundai Genesis Coupe Driver Front Knee Spindle w/ Hub & Control Arms

Donor Car:

2016 Hyundai Genesis Coupe 3.8 R-Spec - 98K

Functionality:

In good usable condition. Wheel hub spun smoothly with no excessive play, however, there was a little bit of noise that could be heard during rotation. You may want to replace the wheel bearing prior to use. 

Physical Condition:

In mostly good used physical condition, free of any major hits or bends to the components, however, there is heavier surface corrosion from age and regular use, as shown. Bushings are intact with no major rips or tears in the rubber. There are scrapes along the underside of the lower control arm where the vehicle was previously transported using a forklift, as shown. You will need to reuse some of your existing hardware for installation.

Fits:

2013, 2014, 2015, 2016 Hyundai Genesis Coupe 3.8

2013, 2014 Hyundai Genesis Coupe 2.0T

Fitment Notes:

Removed from a 3.8 Track models with the larger Brembo brake system. If your vehicle is not equipped with those calipers, you may need to reuse your existing dust shield for installation. Some of the included components may also fit the 2010-2012 models. Includes the following components:

Passenger Knuckle: 51716-2M101

Hub: 51750-2M000

Front Control Arm: 54506-2M000

Rear Control Arm: 54501-2M500