2008-2013 Chevrolet Corvette C6 6.2l LS3 V8 Engine Long Block *REBUILT* C6021

2008-2013 Chevrolet Corvette C6 6.2l LS3 V8 Engine Long Block *REBUILT*

Donor Car:

2011 Chevrolet C6 Corvette Base Coupe 3LT - 80K

Functionality:

Engine was removed from a running and driving vehicle, and was able to be fully tested prior to removal from the vehicle. The engine has stampings from aftermarket cylinder head rebuilders as shown. The oil pan was also previously replaced. Engine has aftermarket pistons as shown. The engine was also modified with an aftermarket camshaft. The branding or specifications of the camshaft are unknown. The original throttle body has been replaced with an aftermarket 95mm electronic throttle body as shown. There may be additional modifications to the engine internals. Engine had no major oil or fluid leaks during testing. Engine oil and fluids have been drained with no abnormalities or signs of internal damage to the oil pump or cylinder heads. Ships drained of all fluids. We have performed a compression test with good results (driver : 180-180-185-190 / passenger : 200-190-200-200). 

*During testing, the engine oil pressure gauge was reading low. We were unable to determine if this reading was caused by the sensor / sending unit or the oil pump itself. We recommend having this professionally inspected and repaired prior to use. * 

Physical Condition:

Engine is in good physical condition, has not been hit or damaged in any way. Components are free of any major surface rusting or corrosion. 

Includes the following components, nothing more or less. There will be various components and hardware reused for installation. Includes the engine block, aftermarket refurbished cylinder heads, aftermarket pistons, aftermarket camshaft, oil pan, aftermarket 95mm throttle body, intake manifold, fuel rails, injectors, coil packs, spark plugs, Dorman crank pulley, ARP pulley bolt, water pump, alternator, AC compressor, power steering pump, starter, wiring harness, ECU module, motor mount brackets.

Fits:

2008, 2009, 2010, 2011, 2012, 2013 Chevrolet Corvette C6 Base

2010, 2011, 2012, 2013 Chevrolet Corvette C6 Grand Sport (w/ automatic transmission)

Fitment Notes:

** We have included some components commonly used when swapping this engine into other vehicle. We have include the front accessory assemblies, motor mount brackets, throttle body, factory wiring harness, and ECU. There still may be some additional components required to use this as a complete swap **

This can NOT be used for the 2010-2013 Grand Sport models equipped with the manual transmission due to the addition of the dry sump oiling system components.

*** Please Read Shipping Details Below***

This item will ship on a pallet via Fedex Freight to the Continental 48 States, Mexico and Canada. Please add the item to the cart to see the exact shipping costs associated with it. There will be two options for shipping, one without a liftgate equipped truck and one with a liftgate. If you have a business address with a loading dock, forklift or other means of unloading the pallet off of the delivery truck you will not need a liftgate equipped truck for delivery. If you have a residential address or are unsure about unloading the pallet from the truck please refer to the weight of the shipment above on this listing page, so you can make the decision on whether you will need a liftgate or not. For residential deliveries Fedex will contact you, at the phone number provided, to schedule an appointment for delivery. As with all freight companies they deliver to the curb, not inside, so please plan accordingly for your delivery.