2000-2002 Porsche 986 Boxster S 3.2l Engine Long Block / M96.21 / 76K *DAMAGE* BX075

2000-2002 Porsche 986 Boxster S 3.2l Engine Long Block / M96.21

Donor Car:

2002 Porsche 986 Boxster S 3.2l - 76K

Functionality:

Removed from a running and driving car, fully tested prior to dismantling. Engine idles smoothly at 750 rpm with no smoking upon startup or hesitations when revving. Engine had some visible oil leak residue from the rear main seal during testing. Oil and fluids have been drained with no abnormalities. Ships drained of all fluids. 

We have compression tested this engine with results (driver - 170-100-140 / passenger - 130-170-150). We have also leak down tested each cylinder and found cylinders # 1, 3, 4, 5, and 6 to all have extreme cylinder pressure loss. We have included photos of each cylinder leak down results in the photos above. Cylinders with pressure loss had audible air escaping from the exhaust ports and from the crank case. Because of the compression and leak down results, we highly recommend having this engine professionally rebuilt prior to installation. 

Physical Condition:

In good physical condition, Engine block has not been hit or cracked in any way. Free off any major surface rusting or corrosion. The exhaust manifold studs typically rust and seized due to the extreme heat. We were able to remove all exhaust studs with no damage. Two separate sensor connectors on the wiring harness were previously damaged and repaired as shown in the photos. 

Includes the engine long block, cylinder heads, oil pan, crank pulley, water pump, alternator, AC compressor, Power steering pump, intake manifold, throttle body, wiring harness, fuel rails, injectors, coil packs, and starter motor as shown. You will need to reuse some of your existing hardware and components for installation.

Fits:

2000, 2001, 2002 Porsche 986 Boxster S 3.2l

Fitment Notes:

Removed from a 2002 Porsche 986 Boxster S with the manual transmission. This engine will physically fit vehicles with the automatic transmissions, however there may be some differences such as wiring and sensors that will need to be swapped over from your old engine.

Engine code - M96.21

*** Please Read Shipping Details Below***

This item will ship on a pallet via Fedex Freight to the Continental 48 States, Mexico and Canada. Please add the item to the cart to see the exact shipping costs associated with it. There will be two options for shipping, one without a liftgate equipped truck and one with a liftgate. If you have a business address with a loading dock, forklift or other means of unloading the pallet off of the delivery truck you will not need a liftgate equipped truck for delivery. If you have a residential address or are unsure about unloading the pallet from the truck please refer to the weight of the shipment above on this listing page, so you can make the decision on whether you will need a liftgate or not. For residential deliveries Fedex will contact you, at the phone number provided, to schedule an appointment for delivery. As with all freight companies they deliver to the curb, not inside, so please plan accordingly for your delivery.